A few years ago, I crafted a marine-themed baby mobile for some friends, and one of my favorite elements was the killer whale. I loved the design so much, I knew it had to become a bag charm! In this tutorial, I’ll show you how to create your own sleek and playful orca charm to add to your collection.
اطبعها على ورق بحجم A4 أو US letter اعتمادًا على الإصدار الذي قمت بتنزيله.
تأكد من عدم تغيير حجم النمط بالتحقق من إعدادات الطباعة. يمكنك التحقق من صحة الطباعة بقياس المرجع الموجود أسفل كل صفحة.
احتفظ بمخطط التجميع لمساعدتك في وضع القطع لاحقًا أثناء عملية الخياطة.
تثبيت قطع النموذج على الجلد
قم بقص العناصر المختلفة للنمط بشكل تقريبي ثم ثبتها على قطعة الجلد باستخدام شريط لاصق.
ثقب الثقوب
استخدم شوكات الخياطة أو مثقب الثقوب لثقب ثقوب الخياطة مباشرة فوق الورقة.
استخدم مثقابًا مقاس 3 مم لثقب الثقوب التي ستستوعب البرشام الموجود على حزام الحلقة O (العنصر الموضح ف on the pattern) and a 4mm hole punch for the eyes on elements ب.
قطع أجزاء المشروع
باستخدام زوج من المقص أو سكين X-Acto، قم بقص كافة أجزاء المشروع.
Painting / dyeing the leather
The colors I used for this project couldn’t be simpler: black and white Angelus paints!
Setting the rivet on the O-ring strap
Create a loop at the end of the O-ring strap (هـ) with a rivet, using your rivet setter to set it up.
Gluing the eyes
Set the plastic eyes in place in their sockets.
Apply a generous amount of glue to the backside in order to secure them in place and wait for it to dry completely.
خياطة كل ذلك معا
Start stitching the white motif next to the eye (أ على ب) باستخدام غرزة السرج.
Next stitch the top part of the body to the belly (ب زيادة ج) using a black thread and a saddle stitch.
Don’t forget to add the fin (د) in between.
To join both halves of the orca, start by joining the belly (ج1 و سي 2) using a white thread and a cross-stitch.
You can use a saddle stitch if you wish (it’s a bit easier) but the cross-stitch makes the orca look more 3 dimensional.
Switch to a black thread to continue stitching both halves of the orca.
Once you reach the hole at the tip of the body, add the tail (ف).
This is the procedure I followed:
1 cross stitch between the left and right holes, ending in the same two opposite holes instead of progressing to the next two holes.
left thread goes through hole in the tail, crosses to enter right hole and comes back through left hole.
right thread goes through hole in the tail, crosses to enter left hole and comes back through the right hole.
1 cross stitch between the left and right holes now above the tail, progressing to the next two holes.
Add some stuffing as you progressively close the orca’s body.
Add the O-ring strap (هـ) between the two halves of the body (ب1 و ب2).
That’s it! Congratulations on making a beautiful orca bag charm!
اللمسات الأخيرة
Complete your bag charm by adding the O-ring carabiner to the strap (هـ).
النتيجة النهائية
أتمنى أن تكونوا قد استمتعتم بمتابعة هذا البرنامج التعليمي. شاركوا صورةً من إبداعكم في التعليقات أدناه. سيسعدني كثيرًا أن أرى مشاريعي الصغيرة تُنشر على الإنترنت وأنتم تُبدعونها.
أي تعليق/سؤال حول هذا البرنامج التعليمي أو فكرة المشروع الذي ترغب في رؤيته منشورًا هنا هو وسوف يكون دائمًا أكثر من موضع ترحيب.
صناعة سعيدة!
الحواشي
لقد قدم المحتوى عبر الإنترنت التالي بعض المساعدة و/أو الإلهام أثناء إنشاء هذا المشروع:
عند تسجيل دخولك لأول مرة باستخدام زر تسجيل الدخول الاجتماعي، نجمع معلومات ملفك الشخصي العام التي يشاركها مزود تسجيل الدخول الاجتماعي، بناءً على إعدادات خصوصيتك. كما نحصل على عنوان بريدك الإلكتروني لإنشاء حساب لك تلقائيًا على موقعنا. بمجرد إنشاء حسابك، سيتم تسجيل دخولك إليه.
لا أوافقيوافق
أسمح بإنشاء حساب
عند تسجيل دخولك لأول مرة باستخدام زر تسجيل الدخول الاجتماعي، نجمع معلومات ملفك الشخصي العام التي يشاركها مزود تسجيل الدخول الاجتماعي، بناءً على إعدادات خصوصيتك. كما نحصل على عنوان بريدك الإلكتروني لإنشاء حساب لك تلقائيًا على موقعنا. بمجرد إنشاء حسابك، سيتم تسجيل دخولك إليه.
درس تعليمي
Orca Bag Charm
3 ساعات
سهل
شائع في صناعة الجلود
A few years ago, I crafted a marine-themed baby mobile for some friends, and one of my favorite elements was the killer whale. I loved the design so much, I knew it had to become a bag charm! In this tutorial, I’ll show you how to create your own sleek and playful orca charm to add to your collection.
متطلبات
مهارات
أدوات
قائمة المواد
نمط
Orca Bag Charm Pattern
2,00 $المشي من خلال
طباعة النمط
أنت تستطيع احصل على النمط هنا إذا لم تكن قد فعلت ذلك بالفعل.
اطبعها على ورق بحجم A4 أو US letter اعتمادًا على الإصدار الذي قمت بتنزيله.
تأكد من عدم تغيير حجم النمط بالتحقق من إعدادات الطباعة. يمكنك التحقق من صحة الطباعة بقياس المرجع الموجود أسفل كل صفحة.
احتفظ بمخطط التجميع لمساعدتك في وضع القطع لاحقًا أثناء عملية الخياطة.
تثبيت قطع النموذج على الجلد
قم بقص العناصر المختلفة للنمط بشكل تقريبي ثم ثبتها على قطعة الجلد باستخدام شريط لاصق.
ثقب الثقوب
استخدم شوكات الخياطة أو مثقب الثقوب لثقب ثقوب الخياطة مباشرة فوق الورقة.
استخدم مثقابًا مقاس 3 مم لثقب الثقوب التي ستستوعب البرشام الموجود على حزام الحلقة O (العنصر الموضح ف on the pattern) and a 4mm hole punch for the eyes on elements ب.
قطع أجزاء المشروع
باستخدام زوج من المقص أو سكين X-Acto، قم بقص كافة أجزاء المشروع.
Painting / dyeing the leather
The colors I used for this project couldn’t be simpler: black and white Angelus paints!
Setting the rivet on the O-ring strap
Create a loop at the end of the O-ring strap (هـ) with a rivet, using your rivet setter to set it up.
Gluing the eyes
Set the plastic eyes in place in their sockets.
Apply a generous amount of glue to the backside in order to secure them in place and wait for it to dry completely.
خياطة كل ذلك معا
Start stitching the white motif next to the eye (أ على ب) باستخدام غرزة السرج.
Next stitch the top part of the body to the belly (ب زيادة ج) using a black thread and a saddle stitch.
Don’t forget to add the fin (د) in between.
To join both halves of the orca, start by joining the belly (ج1 و سي 2) using a white thread and a cross-stitch.
You can use a saddle stitch if you wish (it’s a bit easier) but the cross-stitch makes the orca look more 3 dimensional.
Switch to a black thread to continue stitching both halves of the orca.
Once you reach the hole at the tip of the body, add the tail (ف).
This is the procedure I followed:
Add some stuffing as you progressively close the orca’s body.
Add the O-ring strap (هـ) between the two halves of the body (ب1 و ب2).
That’s it! Congratulations on making a beautiful orca bag charm!
اللمسات الأخيرة
Complete your bag charm by adding the O-ring carabiner to the strap (هـ).
النتيجة النهائية
أتمنى أن تكونوا قد استمتعتم بمتابعة هذا البرنامج التعليمي. شاركوا صورةً من إبداعكم في التعليقات أدناه. سيسعدني كثيرًا أن أرى مشاريعي الصغيرة تُنشر على الإنترنت وأنتم تُبدعونها.
أي تعليق/سؤال حول هذا البرنامج التعليمي أو فكرة المشروع الذي ترغب في رؤيته منشورًا هنا هو وسوف يكون دائمًا أكثر من موضع ترحيب.
صناعة سعيدة!
الحواشي
لقد قدم المحتوى عبر الإنترنت التالي بعض المساعدة و/أو الإلهام أثناء إنشاء هذا المشروع: