A few years ago, I crafted a marine-themed baby mobile for some friends, and one of my favorite elements was the killer whale. I loved the design so much, I knew it had to become a bag charm! In this tutorial, I’ll show you how to create your own sleek and playful orca charm to add to your collection.
Drucken Sie es je nach heruntergeladener Version auf US-Letter- oder A4-Papier aus.
Stellen Sie sicher, dass die Größe des Musters nicht verändert wird, indem Sie Ihre Druckeinstellungen überprüfen. Sie können überprüfen, ob es richtig gedruckt wurde, indem Sie die Referenz unten auf jeder Seite messen.
Bewahren Sie das Montagediagramm auf, damit Sie die Teile später während des Nähvorgangs besser positionieren können.
Befestigen der Musterstücke auf dem Leder
Schneiden Sie die verschiedenen Elemente des Musters grob aus und befestigen Sie sie mit Klebeband auf Ihrem Lederstück.
Löcher stanzen
Verwenden Sie Heftklammern oder einen Locher, um die Heftlöcher direkt auf das Papier zu stanzen.
Verwenden Sie einen 3-mm-Lochstanzer, um die Löcher zu stanzen, die die Niete am O-Ring-Band aufnehmen sollen (Element mit Anmerkung versehen). F on the pattern) and a 4mm hole punch for the eyes on elements B.
Ausschneiden der Teile des Projekts
Schneiden Sie mit einer Schere oder einem X-Acto-Messer alle Teile des Projekts aus.
Painting / dyeing the leather
The colors I used for this project couldn’t be simpler: black and white Angelus paints!
Setting the rivet on the O-ring strap
Create a loop at the end of the O-ring strap (E) with a rivet, using your rivet setter to set it up.
Gluing the eyes
Set the plastic eyes in place in their sockets.
Apply a generous amount of glue to the backside in order to secure them in place and wait for it to dry completely.
Alles zusammennähen
Start stitching the white motif next to the eye (A An B) mit einem Sattelstich.
Next stitch the top part of the body to the belly (B über C) using a black thread and a saddle stitch.
Don’t forget to add the fin (D) in between.
To join both halves of the orca, start by joining the belly (C1 Und C2) using a white thread and a cross-stitch.
You can use a saddle stitch if you wish (it’s a bit easier) but the cross-stitch makes the orca look more 3 dimensional.
Switch to a black thread to continue stitching both halves of the orca.
Once you reach the hole at the tip of the body, add the tail (F).
This is the procedure I followed:
1 cross stitch between the left and right holes, ending in the same two opposite holes instead of progressing to the next two holes.
left thread goes through hole in the tail, crosses to enter right hole and comes back through left hole.
right thread goes through hole in the tail, crosses to enter left hole and comes back through the right hole.
1 cross stitch between the left and right holes now above the tail, progressing to the next two holes.
Add some stuffing as you progressively close the orca’s body.
Add the O-ring strap (E) between the two halves of the body (B1 Und B2).
That’s it! Congratulations on making a beautiful orca bag charm!
Feinschliff
Complete your bag charm by adding the O-ring carabiner to the strap (E).
Endergebnis
Ich hoffe, euch hat dieses Tutorial Spaß gemacht. Postet doch gerne ein Foto eurer Kreation in den Kommentaren unten. Es würde mir sehr viel bedeuten, meine kleinen Projekte in der Welt zu sehen, während ihr sie zu euren eigenen macht.
Jegliches Feedback/jede Frage zu diesem Tutorial oder dieser Projektidee, die Sie hier veröffentlicht sehen möchten, ist und bleibt jederzeit herzlich willkommen.
Viel Spaß beim Basteln!
Fußnoten
Die folgenden Online-Inhalte dienten als Hilfe und/oder Inspiration bei der Erstellung dieses Projekts:
Wenn Sie sich zum ersten Mal bei einer Social-Login-Schaltfläche anmelden, erfassen wir die von Ihrem Social-Login-Anbieter freigegebenen Informationen zum öffentlichen Profil Ihres Kontos, basierend auf Ihren Datenschutzeinstellungen. Wir erhalten auch Ihre E-Mail-Adresse, um automatisch ein Konto für Sie auf unserer Website zu erstellen. Sobald Ihr Konto erstellt wurde, werden Sie bei diesem Konto angemeldet.
AblehnenIch stimme zu
Ich erlaube ein Konto zu erstellen
Wenn Sie sich zum ersten Mal bei einer Social-Login-Schaltfläche anmelden, erfassen wir die von Ihrem Social-Login-Anbieter freigegebenen Informationen zum öffentlichen Profil Ihres Kontos, basierend auf Ihren Datenschutzeinstellungen. Wir erhalten auch Ihre E-Mail-Adresse, um automatisch ein Konto für Sie auf unserer Website zu erstellen. Sobald Ihr Konto erstellt wurde, werden Sie bei diesem Konto angemeldet.
Lernprogramm
Orca Bag Charm
3 Stunden
Einfach
Üblich für Lederhandwerk
A few years ago, I crafted a marine-themed baby mobile for some friends, and one of my favorite elements was the killer whale. I loved the design so much, I knew it had to become a bag charm! In this tutorial, I’ll show you how to create your own sleek and playful orca charm to add to your collection.
Anforderungen
Fähigkeiten
Werkzeuge
Stückliste
Muster
Orca Bag Charm Pattern
2,00 $Rundgang
Drucken des Musters
Du kannst Holen Sie sich das Muster hier falls Sie es noch nicht getan haben.
Drucken Sie es je nach heruntergeladener Version auf US-Letter- oder A4-Papier aus.
Stellen Sie sicher, dass die Größe des Musters nicht verändert wird, indem Sie Ihre Druckeinstellungen überprüfen. Sie können überprüfen, ob es richtig gedruckt wurde, indem Sie die Referenz unten auf jeder Seite messen.
Bewahren Sie das Montagediagramm auf, damit Sie die Teile später während des Nähvorgangs besser positionieren können.
Befestigen der Musterstücke auf dem Leder
Schneiden Sie die verschiedenen Elemente des Musters grob aus und befestigen Sie sie mit Klebeband auf Ihrem Lederstück.
Löcher stanzen
Verwenden Sie Heftklammern oder einen Locher, um die Heftlöcher direkt auf das Papier zu stanzen.
Verwenden Sie einen 3-mm-Lochstanzer, um die Löcher zu stanzen, die die Niete am O-Ring-Band aufnehmen sollen (Element mit Anmerkung versehen). F on the pattern) and a 4mm hole punch for the eyes on elements B.
Ausschneiden der Teile des Projekts
Schneiden Sie mit einer Schere oder einem X-Acto-Messer alle Teile des Projekts aus.
Painting / dyeing the leather
The colors I used for this project couldn’t be simpler: black and white Angelus paints!
Setting the rivet on the O-ring strap
Create a loop at the end of the O-ring strap (E) with a rivet, using your rivet setter to set it up.
Gluing the eyes
Set the plastic eyes in place in their sockets.
Apply a generous amount of glue to the backside in order to secure them in place and wait for it to dry completely.
Alles zusammennähen
Start stitching the white motif next to the eye (A An B) mit einem Sattelstich.
Next stitch the top part of the body to the belly (B über C) using a black thread and a saddle stitch.
Don’t forget to add the fin (D) in between.
To join both halves of the orca, start by joining the belly (C1 Und C2) using a white thread and a cross-stitch.
You can use a saddle stitch if you wish (it’s a bit easier) but the cross-stitch makes the orca look more 3 dimensional.
Switch to a black thread to continue stitching both halves of the orca.
Once you reach the hole at the tip of the body, add the tail (F).
This is the procedure I followed:
Add some stuffing as you progressively close the orca’s body.
Add the O-ring strap (E) between the two halves of the body (B1 Und B2).
That’s it! Congratulations on making a beautiful orca bag charm!
Feinschliff
Complete your bag charm by adding the O-ring carabiner to the strap (E).
Endergebnis
Ich hoffe, euch hat dieses Tutorial Spaß gemacht. Postet doch gerne ein Foto eurer Kreation in den Kommentaren unten. Es würde mir sehr viel bedeuten, meine kleinen Projekte in der Welt zu sehen, während ihr sie zu euren eigenen macht.
Jegliches Feedback/jede Frage zu diesem Tutorial oder dieser Projektidee, die Sie hier veröffentlicht sehen möchten, ist und bleibt jederzeit herzlich willkommen.
Viel Spaß beim Basteln!
Fußnoten
Die folgenden Online-Inhalte dienten als Hilfe und/oder Inspiration bei der Erstellung dieses Projekts: