I don’t often make card holders but since my friend got a new job as a real estate agent she asked me if I could make something for her to carry her business cards. So of course I was happy to oblige!
The pattern offers 4 different options for the layout of the cardholder. They are almost identical in terms of build process thus only option 1 will be showcased in this tutorial.
For the two the pieces denoted A on the pattern, use a two pieces of leather glued on top of each other in order to obtain double the thickness of the other pieces.
打缝合孔
使用缝合尖头或打孔器为所有部件打出缝合孔，并使用您之前留下的标记作为定位的指导。
切割项目的各个部分
使用剪刀或 X-Acto 刀，剪掉项目的所有部分。
Burnishing the edges Episode 1 – The bevel menace
The uppermost edge of 元素B and the lowermost edge of 元素C need to be burnished before those pieces can be stitched together.
Bevel those edges with your edge beveler (size n*1 in my case).
教程
名片钱包
2小时
简单的
皮革工艺中常见
I don’t often make card holders but since my friend got a new job as a real estate agent she asked me if I could make something for her to carry her business cards. So of course I was happy to oblige!
The pattern offers 4 different options for the layout of the cardholder. They are almost identical in terms of build process thus only option 1 will be showcased in this tutorial.
要求
技能
工具
材料清单
图案
名片钱包图案
演练
打印和切割图案
根据您下载的版本，将其打印在 US letter 或 A4 纸上，并剪下项目的各个部分。
检查您的打印设置，确保图案大小未被调整。您可以通过测量每页底部的参考来检查打印是否正确。
在卡片纸上打印，以便更轻松地描绘皮革上的形状。
在皮革上描出图案的轮廓
使用锥子在皮革上描出图案的轮廓。
不要忘记标记我们稍后需要打孔的位置。
For the two the pieces denoted A on the pattern, use a two pieces of leather glued on top of each other in order to obtain double the thickness of the other pieces.
打缝合孔
使用缝合尖头或打孔器为所有部件打出缝合孔，并使用您之前留下的标记作为定位的指导。
切割项目的各个部分
使用剪刀或 X-Acto 刀，剪掉项目的所有部分。
Burnishing the edges Episode 1 – The bevel menace
The uppermost edge of 元素B and the lowermost edge of 元素C need to be burnished before those pieces can be stitched together.
Bevel those edges with your edge beveler (size n*1 in my case).
使用约 200 目砂纸打磨任何不规则之处，然后使用逐渐更细的粒度准备边缘进行抛光。砂粒越细，边缘就越光滑，这将使实际的抛光变得更容易，结果看起来更干净。
打磨前用水润湿正在加工的边缘。与干燥工作相比，它将帮助您更快地获得光滑的效果，并且可以最大程度地减少空气中的皮革灰尘量
使用您选择的方法抛光边缘。我通常会在边缘涂上一些tokonole，并使用木质边缘光滑剂来产生抛光所需的摩擦力。您也可以使用棉抹布，简单地润湿边缘，效果很好（通常比低质量的木抹布更好）。
You can also seal the rough side by applying tokonole and then burnishing it with the cone of the wood slicker.
Setting the push-button
Set-up the push-button using your anvil and setter tool.
缝合卡夹
Sand both sides of elements A to help the cement penetrate the fibres and provide a good bond.
Glue the two pieces on the main piece of the card holder. Fold this piece to glue the other side and thus create the compartment of the card holder.
Finally glue element C to the main piece of the card holder.
Stitch the three edges using a saddle stitch or a cross stitch.
Burnishing the edges Episode 2 – Attack of the sleekers
Using the same procedure that we followed earlier, bevel and burnish the remaining raw edges.
收尾工作
将您选择的调理产品涂抹在您的作品上，然后用棉布用力擦拭，以擦亮并赋予其漂亮的光泽。
我使用一种皮革香膏，将 1 份蜂蜡和 6 份橄榄油轻轻融化在一起制成。它非常适合滋养和防水。
最后结果
我希望您喜欢学习本教程。请考虑在下面的评论中发布您创作的照片。当你把我的小项目变成你自己的项目时，看到它走向世界对我来说意义重大。
如果您希望在此处看到有关本教程或项目想法的任何反馈/问题，我们将永远欢迎您。
快乐制作！
脚注
以下在线内容在本项目的制作过程中提供了一些帮助和/或灵感：
I’ve made three of these now and I’m learning a lot. thanks.