I usually use my leather scraps to make key-chains like the ones in the picture below. But today I thought I would try something different inspired by some etsy products I saw on pinterest.
I will be working with 3 different kind of leathers: a piece of calfskin, a piece of first grade 5oz and finally some second grade 4oz. All are vegetable tanned.
As I will be using different techniques to decorate the bookmarks during some steps I will go into specific details for each piece. However when the treatment between the piece will be the same I will only illustrate the operation with one piece and show the result for all the bookmarks.
Print the patterns and cut-out the pieces of the project.
Make sure that the pattern is not resized by checking your print settings. You can check if it was printed properly by measuring the test box on the pattern to ensure that its sides are 5cm long.
Print on thick paper to make it easier to trace the shape on the leather. 200g/cm2 and above is ideal (as long as your printer can handle it)
Tracing the patterns onto the leather
Trace the outline of the heart onto the leather twice.
For the bookmarks with the embroidery, mark every stitch point and trace the lines between them using the patterns as a guide.
I omitted tracing the lines for the wings as markings don’t come out so well on calfskin.
For the dotted bookmarks, mark the center of every hole to be punched through.
Finally for the moon, dampen the leather before tracing on top of the paper to leave a clear mark on the leather.
I mainly used two techniques here:
I applied a coat of oil on the cow skins and Tokonole on the calfskin (I like the texture that it gives to calfskin. Sometimes I use oil as well but it darkens the color and that’s the what I was going for).
.
At that point the moon bookmark is going to disappear but don’t be alarmed. I simply called it a day and threw a piece of leather on top of it. The next day I started working again, finished all the bookmarks and took all the pictures only to realize while cleaning out my desk that the moon was left unfinished. It will make its come back in the final result pictures
I punched my logo into the heart.
The punch sizes used are as follow:
Each size is represented by a different line pattern on the PDF.
For the embroidery, first prepare the holes with an awl according the marks left earlier.
Then start joining each segment using the pattern as a guide.
You might be wondering what happened to the wolf? Well I thought that it looked really good the way it was right after dyeing so I left it at that.
Now you can cut the outline of the 6 bookmarks’ pieces (12 pieces total).
A pair of scissors works fine too. It all depends on the leather you are using and how precise you want the result to look like (or inversely the amount of effort that you are willing to put in).
At that point the diagonal edge should be burnished as it will become more difficult to do so once both parts of the bookmark are glued onto one another.
Start by beveling the edge on both sides. You can use sandpaper to smooth out the result.
I also died the rough side and the edges of the dotted bookmarks.
Use the method of your choice to burnish the edge of all 6 pieces.
I am using a wood slicker and Tokonole in that case.
Use leather cement to glue along the corner edges of the bookmarks.
Mark the stitching lines on the corner edges and punch the holes. I’m using chisels but an awl is fine of course.
Stitch along all the corners.
At that point you can bevel and burnish the remaining edges.
Finally apply to finishing product on your pieces. Let it dry, give it a good rub with a cotton rag and you’re done!
I’m really happy with these and hope that you will enjoy the patterns.
As always, please feel free to share any feedback about this tutorial or any project idea you’d like to see posted here.
The following online content provided some assistance and/or inspiration during the making of this project:
When you login first time using a Social Login button, we collect your account public profile information shared by Social Login provider, based on your privacy settings. We also get your email address to automatically create an account for you in our website. Once your account is created, you'll be logged-in to this account.
DisagreeAgree
I allow to create an account
When you login first time using a Social Login button, we collect your account public profile information shared by Social Login provider, based on your privacy settings. We also get your email address to automatically create an account for you in our website. Once your account is created, you'll be logged-in to this account.
Tutorial
6 leather bookmarks ideas
1 hour/bookmark
Easy
Common for leathercraft
I usually use my leather scraps to make key-chains like the ones in the picture below. But today I thought I would try something different inspired by some etsy products I saw on pinterest.
I will be working with 3 different kind of leathers: a piece of calfskin, a piece of first grade 5oz and finally some second grade 4oz. All are vegetable tanned.
As I will be using different techniques to decorate the bookmarks during some steps I will go into specific details for each piece. However when the treatment between the piece will be the same I will only illustrate the operation with one piece and show the result for all the bookmarks.
Requirements
Skills
Tools
Bill of Materials
Patterns
6 Bookmarks Patterns
Free!Walk-through
Printing and cutting the patterns
Print the patterns and cut-out the pieces of the project.
Make sure that the pattern is not resized by checking your print settings. You can check if it was printed properly by measuring the test box on the pattern to ensure that its sides are 5cm long.
Print on thick paper to make it easier to trace the shape on the leather. 200g/cm2 and above is ideal (as long as your printer can handle it)
Tracing the patterns onto the leather
Trace the outline of the heart onto the leather twice.
For the bookmarks with the embroidery, mark every stitch point and trace the lines between them using the patterns as a guide.
I omitted tracing the lines for the wings as markings don’t come out so well on calfskin.
For the dotted bookmarks, mark the center of every hole to be punched through.
Finally for the moon, dampen the leather before tracing on top of the paper to leave a clear mark on the leather.
I mainly used two techniques here:
I applied a coat of oil on the cow skins and Tokonole on the calfskin (I like the texture that it gives to calfskin. Sometimes I use oil as well but it darkens the color and that’s the what I was going for).
At that point the moon bookmark is going to disappear but don’t be alarmed. I simply called it a day and threw a piece of leather on top of it. The next day I started working again, finished all the bookmarks and took all the pictures only to realize while cleaning out my desk that the moon was left unfinished. It will make its come back in the final result pictures
I punched my logo into the heart.
The punch sizes used are as follow:
Each size is represented by a different line pattern on the PDF.
For the embroidery, first prepare the holes with an awl according the marks left earlier.
Then start joining each segment using the pattern as a guide.
You might be wondering what happened to the wolf? Well I thought that it looked really good the way it was right after dyeing so I left it at that.
Now you can cut the outline of the 6 bookmarks’ pieces (12 pieces total).
A pair of scissors works fine too. It all depends on the leather you are using and how precise you want the result to look like (or inversely the amount of effort that you are willing to put in).
At that point the diagonal edge should be burnished as it will become more difficult to do so once both parts of the bookmark are glued onto one another.
Start by beveling the edge on both sides. You can use sandpaper to smooth out the result.
I also died the rough side and the edges of the dotted bookmarks.
Use the method of your choice to burnish the edge of all 6 pieces.
I am using a wood slicker and Tokonole in that case.
Use leather cement to glue along the corner edges of the bookmarks.
Mark the stitching lines on the corner edges and punch the holes. I’m using chisels but an awl is fine of course.
Stitch along all the corners.
At that point you can bevel and burnish the remaining edges.
Finally apply to finishing product on your pieces. Let it dry, give it a good rub with a cotton rag and you’re done!
I’m really happy with these and hope that you will enjoy the patterns.
As always, please feel free to share any feedback about this tutorial or any project idea you’d like to see posted here.
The following online content provided some assistance and/or inspiration during the making of this project: