0 0 投票文章評級所需時間複雜工具及用品 30mn (+1 week drying)簡單的常見的I had some paper pulp left from 製作再生紙 and thought that it would be a good opportunity to make a decorative bedside bowl for my partner’s jewelries. Let’s make it together! 目錄 隱藏 1. 要求 1.1. 工具 1.2. 材料清單 2. 演練 2.1. Preparing the paper pulp 2.2. Shaping & coloring the bowl 2.3. 烘乾 2.4. Coating the bowl 2.5. 最後結果 3. 註腳 要求工具A blender or hand mixerA bowl材料清單Paper or cardboard scraps to recycleWatercolor paints演練Preparing the paper pulpTear down your paper scraps into little pieces and let them soak overnight.Then blend them into a fine paste with your tool of choice.Shaping & coloring the bowlApply the paste at the bottom of your bowl and press it with your fingers to shape it against the sides of the bowl.When you are satisfied, dab some paint here and there to your taste. You can then use a brush loaded with water to help the pigment spread around if the paper paste wasn’t wet enough.. This method has the benefit of leaving the bottom side of the bowl with a very smooth texture. It shouldn’t get stuck as the paper bowl will contract as it dries and become smaller than its mold but if you really want to make sure you can line the mold with plastic wrap.烘乾Wait until the bowl is completely dry before attempting the remove it from its mold. The paper paste even a little damp as no solidity at all.It could take up to a week.Coating the bowlWhen the bowl is dry remove it from its mold and apply a coat of diluted white glue with a brush on the whole piece. This will highlight the colors and give some additional strength to the bowl.最後結果There you go, a simple recycled bowl to hold your keys jewellery or anything else you might like.註腳Here is another bowl example that I made in the past.