After I designed the Mosque Lantern, I wondered what a scaled down version would look like. This is how this unique accessory that celebrates architectural beauty and craftsmanship was born.
Ready to begin? Let’s first take a look at the materials you’ll need and the detailed steps to make your mosque-inspired leather keychain.
Roughly cut-out around the different elements of the pattern and secure them to your piece of leather with masking tape.
打缝合孔
Use stitching prongs or a hole punch to punch the stitching holes directly on top of the paper.
切割项目的各个部分
Use an X-Acto knife to cut-out all the pieces of keychain.
A 5mm hole punch will make it easier to deal with the curves of the windows located on the element denoted 乙 on the pattern.
将边缘倒角
Bevel the edges of all the pieces of the base of the mosque (C, D, 乙, F, G 和 H). This will help with the assembly.
Painting the keychain
I used Angelus leather paint to paint the different elements of the keychain.
I painted the dome, the dome retaining wall, the roof and the sides to match the colour of the Mosque Lantern. I used gold metallic paint for the inside.
将它们缝合在一起
Start by stitching the 8 panels of the dome (A) together using a cross-stitch.
Stitch the two opposite short edges of the dome’s retaining wall (乙) to form cylinder shape.
Then stitch the dome to the retaining wall.
Screw the swivel rivet to the top of the dome.
Stitch the bottom of the wall to the roof (C). The technique is akin to a saddle stitch. But instead of having two pieces flush with each other, they are positioned at a 90 degrees angle.
Stitch the top of the four side panels (D, 乙, F, G) to the periphery of the roof (C).
Close the 4 corners of the base of the mosque.
Finally stitch the floor (H) to the bottom of each side panel (D, 乙, F, G).
There you go, you made your own little mosque keychain!
教程
清真寺钥匙扣
3小时
简单的
皮革工艺中常见
After I designed the Mosque Lantern, I wondered what a scaled down version would look like. This is how this unique accessory that celebrates architectural beauty and craftsmanship was born.
Ready to begin? Let’s first take a look at the materials you’ll need and the detailed steps to make your mosque-inspired leather keychain.
要求
技能
工具
材料清单
图案
清真寺钥匙扣图案
免费！演练
打印图案
你可以 在这里获取图案 如果你还没有。
根据您下载的版本，将其打印在 US letter 或 A4 纸上。
检查您的打印设置，确保图案大小未被调整。您可以通过测量每页底部的参考来检查打印是否正确。
将图案固定在皮革上
Roughly cut-out around the different elements of the pattern and secure them to your piece of leather with masking tape.
打缝合孔
Use stitching prongs or a hole punch to punch the stitching holes directly on top of the paper.
切割项目的各个部分
Use an X-Acto knife to cut-out all the pieces of keychain.
A 5mm hole punch will make it easier to deal with the curves of the windows located on the element denoted 乙 on the pattern.
将边缘倒角
Bevel the edges of all the pieces of the base of the mosque (C, D, 乙, F, G 和 H). This will help with the assembly.
Painting the keychain
I used Angelus leather paint to paint the different elements of the keychain.
I painted the dome, the dome retaining wall, the roof and the sides to match the colour of the Mosque Lantern. I used gold metallic paint for the inside.
将它们缝合在一起
Start by stitching the 8 panels of the dome (A) together using a cross-stitch.
Stitch the two opposite short edges of the dome’s retaining wall (乙) to form cylinder shape.
Then stitch the dome to the retaining wall.
Screw the swivel rivet to the top of the dome.
Stitch the bottom of the wall to the roof (C). The technique is akin to a saddle stitch. But instead of having two pieces flush with each other, they are positioned at a 90 degrees angle.
Stitch the top of the four side panels (D, 乙, F, G) to the periphery of the roof (C).
Close the 4 corners of the base of the mosque.
Finally stitch the floor (H) to the bottom of each side panel (D, 乙, F, G).
There you go, you made your own little mosque keychain!
最后结果
希望您喜欢本教程。请考虑在下面的评论中贴出您的作品照片。如果能看到我的小作品在您的帮助下变成自己的作品，这对我来说意义非凡。
如果您希望在此处看到有关本教程或项目想法的任何反馈/问题，我们将永远欢迎您。
快乐制作！
脚注
以下在线内容在本项目的制作过程中提供了一些帮助和/或灵感：