I’ve been wanting to add more bird to my ever growing menagerie of animals bag charms for a while. Evoking grace and elegance with their luscious plumage, this couple of black and white swan seemed like the perfect addition to my collection. No doubt that it will shine adding a touch of aquatic wilderness to your favourite handbag!
İndirdiğiniz versiyona bağlı olarak bunu Amerikan letter veya A4 kağıdına yazdırın.
Baskı ayarlarınızı kontrol ederek desenin yeniden boyutlandırılmadığından emin olun. Her sayfanın altında bulunan referansı ölçerek düzgün yazdırılıp yazdırılmadığını kontrol edebilirsiniz.
Daha sonra dikiş işlemi sırasında parçaları yerleştirmenize yardımcı olması için montaj şemasını saklayın.
Desen parçalarının deri üzerine sabitlenmesi
Desenin farklı elemanlarını kabaca kesin ve maskeleme bandıyla deri parçanıza sabitleyin.
Put aside the two masks. Those pieces will be used during to paint the motifs of the swan’s head.
Deliklerin delinmesi
Dikiş deliklerini doğrudan kağıdın üstüne açmak için dikiş çatallarını veya bir delgeç kullanın.
O-ring kayışındaki perçinin yerleştirileceği delikleri delmek için 3 mm'lik bir delgeç kullanın (eleman açıklamalı) F (desen üzerinde).
Projenin parçalarının kesilmesi
Bir makas veya X-Acto bıçağı kullanarak projenin tüm parçalarını kesin.
You can use a 3mm hole punch to handle the curves between the back and the base of the neck. A 7.5mm hole punch can be used for the curve between the face and the neck.
Painting / dyeing the leather
I painted this projects using Angelus leather paints. The beak is painted orange, the body white. To paint the wings, I created a gradient using a little bit of black paint mixed with the white.
If your hand is steadier than mine, you probably won’t need to use this trick.
Use the mask to paint the face’s black motif. First put a piece of masking tape on your cutting board. Lay-on the two mirrored masks and cover with a second piece of masking tape to secure them in place. Use an X-acto knife to cut around the mask’s template.
Apply the masks cut-out from the first layer of masking tape on both halves of the swan’s head. Then paint over it using black paint. Remove the masks.
When the black layer dried out, add two white spots over it for the eyes.
Setting the rivet on the O-ring strap
O-ring kayışının ucunu kapatın (F) with a rivet, using your rivet setter to set it up.
Her şeyi bir araya dikmek
All the elements of the swan will be stitched together using a saddle stitch.
Stitch the wings (A, B, C) to the both halves of the body (D1 Ve D2). Start with the largest wing (A), then overlap the next wing (B) and end with the smallest wing in the forefront (C).
Stitch the two opposite sides of the beak (E1 Ve E2) through both halves of the body (D1 Ve D2).
Stitch the two halves of the swan (D1 Ve D2) birlikte.
Kayışı ekle (F) behind the wings.
Don’t forget to add some polyester stuffing as you stitch the body closed.
Son rötuşlar
Add the O-ring carabiner to the strap to complete your bag charm!
This alternative version was stitched using a cross-stitch. It is a bit more tricky to stitch which is why I showcased the saddle-stitched version in the tutorial but I wanted to show you the result in case you wished to give cross-stitching a go. It gives a more 3D effect to the swan which is quite appealing.
Sonuç
Umarım bu eğitimi takip etmekten keyif almışsınızdır. Lütfen aşağıdaki yorumlara kendi yaratımınızın bir fotoğrafını göndermeyi düşünün. Küçük projelerimi sizin kendinize ait hale getirirken dünyaya duyurmak benim için çok şey ifade eder.
Bu eğitim veya proje fikri hakkında burada yayınlanmasını istediğiniz herhangi bir geri bildiriminiz veya sorunuz varsa, her zaman memnuniyetle karşılanacaktır.
Mutlu el işleri!
Dipnotlar
Aşağıdaki çevrimiçi içerik, bu projenin oluşturulması sırasında bir miktar yardım ve/veya ilham sağladı:
Sosyal Giriş düğmesini kullanarak ilk kez oturum açtığınızda, gizlilik ayarlarınıza göre Sosyal Giriş sağlayıcısı tarafından paylaşılan hesabınızın genel profil bilgilerini toplarız. Ayrıca web sitemizde sizin için otomatik olarak bir hesap oluşturmak için e-posta adresinizi alırız. Hesabınız oluşturulduktan sonra, bu hesaba giriş yapmış olacaksınız.
Aynı fikirde olmamakKabul etmek
Bir hesap oluşturmaya izin veriyorum
Sosyal Giriş düğmesini kullanarak ilk kez oturum açtığınızda, gizlilik ayarlarınıza göre Sosyal Giriş sağlayıcısı tarafından paylaşılan hesabınızın genel profil bilgilerini toplarız. Ayrıca web sitemizde sizin için otomatik olarak bir hesap oluşturmak için e-posta adresinizi alırız. Hesabınız oluşturulduktan sonra, bu hesaba giriş yapmış olacaksınız.
Eğitim
Swan Bag Charm
3 saat
Kolay
Deri işçiliğinde yaygın
I’ve been wanting to add more bird to my ever growing menagerie of animals bag charms for a while. Evoking grace and elegance with their luscious plumage, this couple of black and white swan seemed like the perfect addition to my collection. No doubt that it will shine adding a touch of aquatic wilderness to your favourite handbag!
Gereksinimler
Yetenekler
Aletler
Malzeme Listesi
Model
Swan Bag Charm Pattern
2,00 $Gezinti
Desen yazdırma
Yapabilirsiniz deseni buradan alın Eğer henüz yapmadıysanız.
İndirdiğiniz versiyona bağlı olarak bunu Amerikan letter veya A4 kağıdına yazdırın.
Baskı ayarlarınızı kontrol ederek desenin yeniden boyutlandırılmadığından emin olun. Her sayfanın altında bulunan referansı ölçerek düzgün yazdırılıp yazdırılmadığını kontrol edebilirsiniz.
Daha sonra dikiş işlemi sırasında parçaları yerleştirmenize yardımcı olması için montaj şemasını saklayın.
Desen parçalarının deri üzerine sabitlenmesi
Desenin farklı elemanlarını kabaca kesin ve maskeleme bandıyla deri parçanıza sabitleyin.
Put aside the two masks. Those pieces will be used during to paint the motifs of the swan’s head.
Deliklerin delinmesi
Dikiş deliklerini doğrudan kağıdın üstüne açmak için dikiş çatallarını veya bir delgeç kullanın.
O-ring kayışındaki perçinin yerleştirileceği delikleri delmek için 3 mm'lik bir delgeç kullanın (eleman açıklamalı) F (desen üzerinde).
Projenin parçalarının kesilmesi
Bir makas veya X-Acto bıçağı kullanarak projenin tüm parçalarını kesin.
You can use a 3mm hole punch to handle the curves between the back and the base of the neck. A 7.5mm hole punch can be used for the curve between the face and the neck.
Painting / dyeing the leather
I painted this projects using Angelus leather paints. The beak is painted orange, the body white. To paint the wings, I created a gradient using a little bit of black paint mixed with the white.
If your hand is steadier than mine, you probably won’t need to use this trick.
Use the mask to paint the face’s black motif. First put a piece of masking tape on your cutting board. Lay-on the two mirrored masks and cover with a second piece of masking tape to secure them in place. Use an X-acto knife to cut around the mask’s template.
Apply the masks cut-out from the first layer of masking tape on both halves of the swan’s head. Then paint over it using black paint. Remove the masks.
When the black layer dried out, add two white spots over it for the eyes.
Setting the rivet on the O-ring strap
O-ring kayışının ucunu kapatın (F) with a rivet, using your rivet setter to set it up.
Her şeyi bir araya dikmek
All the elements of the swan will be stitched together using a saddle stitch.
Stitch the wings (A, B, C) to the both halves of the body (D1 Ve D2). Start with the largest wing (A), then overlap the next wing (B) and end with the smallest wing in the forefront (C).
Stitch the two opposite sides of the beak (E1 Ve E2) through both halves of the body (D1 Ve D2).
Stitch the two halves of the swan (D1 Ve D2) birlikte.
Kayışı ekle (F) behind the wings.
Don’t forget to add some polyester stuffing as you stitch the body closed.
Son rötuşlar
Add the O-ring carabiner to the strap to complete your bag charm!
This alternative version was stitched using a cross-stitch. It is a bit more tricky to stitch which is why I showcased the saddle-stitched version in the tutorial but I wanted to show you the result in case you wished to give cross-stitching a go. It gives a more 3D effect to the swan which is quite appealing.
Sonuç
Umarım bu eğitimi takip etmekten keyif almışsınızdır. Lütfen aşağıdaki yorumlara kendi yaratımınızın bir fotoğrafını göndermeyi düşünün. Küçük projelerimi sizin kendinize ait hale getirirken dünyaya duyurmak benim için çok şey ifade eder.
Bu eğitim veya proje fikri hakkında burada yayınlanmasını istediğiniz herhangi bir geri bildiriminiz veya sorunuz varsa, her zaman memnuniyetle karşılanacaktır.
Mutlu el işleri!
Dipnotlar
Aşağıdaki çevrimiçi içerik, bu projenin oluşturulması sırasında bir miktar yardım ve/veya ilham sağladı: