I’ve been wanting to add more bird to my ever growing menagerie of animals bag charms for a while. Evoking grace and elegance with their luscious plumage, this couple of black and white swan seemed like the perfect addition to my collection. No doubt that it will shine adding a touch of aquatic wilderness to your favourite handbag!
Imprima em papel carta ou A4, dependendo da versão que você baixou.
Certifique-se de que o padrão não seja redimensionado verificando as configurações de impressão. Você pode verificar se foi impresso corretamente medindo a referência encontrada no final de cada página.
Guarde o diagrama de montagem para ajudá-lo a posicionar as peças posteriormente durante o processo de costura.
Fixando as peças do padrão no couro
Recorte aproximadamente os diferentes elementos do padrão e prenda-os ao pedaço de couro com fita adesiva.
Put aside the two masks. Those pieces will be used during to paint the motifs of the swan’s head.
Fazendo os buracos
Use pinos de costura ou um furador para fazer os furos de costura diretamente na parte superior do papel.
Use um furador de 3 mm para fazer os furos que acomodarão o rebite na tira do O-ring (elemento anotado F no padrão).
Recortando as peças do projeto
Usando uma tesoura ou um estilete, recorte todas as peças do projeto.
You can use a 3mm hole punch to handle the curves between the back and the base of the neck. A 7.5mm hole punch can be used for the curve between the face and the neck.
Painting / dyeing the leather
I painted this projects using Angelus leather paints. The beak is painted orange, the body white. To paint the wings, I created a gradient using a little bit of black paint mixed with the white.
If your hand is steadier than mine, you probably won’t need to use this trick.
Use the mask to paint the face’s black motif. First put a piece of masking tape on your cutting board. Lay-on the two mirrored masks and cover with a second piece of masking tape to secure them in place. Use an X-acto knife to cut around the mask’s template.
Apply the masks cut-out from the first layer of masking tape on both halves of the swan’s head. Then paint over it using black paint. Remove the masks.
When the black layer dried out, add two white spots over it for the eyes.
Setting the rivet on the O-ring strap
Feche a extremidade da tira do anel de vedação (F) with a rivet, using your rivet setter to set it up.
Costurando tudo junto
All the elements of the swan will be stitched together using a saddle stitch.
Stitch the wings (A, B, C) to the both halves of the body (D1 e D2). Start with the largest wing (A), then overlap the next wing (B) and end with the smallest wing in the forefront (C).
Stitch the two opposite sides of the beak (E1 e E2) through both halves of the body (D1 e D2).
Stitch the two halves of the swan (D1 e D2) junto.
Adicione a alça (F) behind the wings.
Don’t forget to add some polyester stuffing as you stitch the body closed.
Toques finais
Add the O-ring carabiner to the strap to complete your bag charm!
This alternative version was stitched using a cross-stitch. It is a bit more tricky to stitch which is why I showcased the saddle-stitched version in the tutorial but I wanted to show you the result in case you wished to give cross-stitching a go. It gives a more 3D effect to the swan which is quite appealing.
Resultado final
Espero que você tenha gostado deste tutorial. Por favor, considere postar uma foto da sua criação nos comentários abaixo. Significaria muito para mim ver meus pequenos projetos sendo divulgados ao mundo enquanto você os torna seus.
Qualquer feedback/pergunta sobre este tutorial ou ideia de projeto que você gostaria de ver postado aqui é e sempre será mais que bem-vindo.
Feliz artesanato!
Notas de rodapé
O seguinte conteúdo online forneceu alguma ajuda e/ou inspiração durante a realização deste projeto:
Quando você faz login pela primeira vez usando um botão de Login Social, coletamos informações de perfil público de sua conta compartilhadas pelo provedor de Login Social, com base em suas configurações de privacidade. Também obtemos seu endereço de e-mail para criar automaticamente uma conta para você em nosso site. Assim que sua conta for criada, você estará conectado a esta conta.
DiscordoConcordar
Eu permito criar uma conta
Quando você faz login pela primeira vez usando um botão de Login Social, coletamos informações de perfil público de sua conta compartilhadas pelo provedor de Login Social, com base em suas configurações de privacidade. Também obtemos seu endereço de e-mail para criar automaticamente uma conta para você em nosso site. Assim que sua conta for criada, você estará conectado a esta conta.
Tutorial
Swan Bag Charm
3 horas
Fácil
Comum para artesanato em couro
I’ve been wanting to add more bird to my ever growing menagerie of animals bag charms for a while. Evoking grace and elegance with their luscious plumage, this couple of black and white swan seemed like the perfect addition to my collection. No doubt that it will shine adding a touch of aquatic wilderness to your favourite handbag!
Requisitos
Habilidades
Ferramentas
Lista de materiais
Padrão
Swan Bag Charm Pattern
2,00 €Passo a passo
Imprimindo o padrão
Você pode pegue o padrão aqui se você ainda não o fez.
Imprima em papel carta ou A4, dependendo da versão que você baixou.
Certifique-se de que o padrão não seja redimensionado verificando as configurações de impressão. Você pode verificar se foi impresso corretamente medindo a referência encontrada no final de cada página.
Guarde o diagrama de montagem para ajudá-lo a posicionar as peças posteriormente durante o processo de costura.
Fixando as peças do padrão no couro
Recorte aproximadamente os diferentes elementos do padrão e prenda-os ao pedaço de couro com fita adesiva.
Put aside the two masks. Those pieces will be used during to paint the motifs of the swan’s head.
Fazendo os buracos
Use pinos de costura ou um furador para fazer os furos de costura diretamente na parte superior do papel.
Use um furador de 3 mm para fazer os furos que acomodarão o rebite na tira do O-ring (elemento anotado F no padrão).
Recortando as peças do projeto
Usando uma tesoura ou um estilete, recorte todas as peças do projeto.
You can use a 3mm hole punch to handle the curves between the back and the base of the neck. A 7.5mm hole punch can be used for the curve between the face and the neck.
Painting / dyeing the leather
I painted this projects using Angelus leather paints. The beak is painted orange, the body white. To paint the wings, I created a gradient using a little bit of black paint mixed with the white.
If your hand is steadier than mine, you probably won’t need to use this trick.
Use the mask to paint the face’s black motif. First put a piece of masking tape on your cutting board. Lay-on the two mirrored masks and cover with a second piece of masking tape to secure them in place. Use an X-acto knife to cut around the mask’s template.
Apply the masks cut-out from the first layer of masking tape on both halves of the swan’s head. Then paint over it using black paint. Remove the masks.
When the black layer dried out, add two white spots over it for the eyes.
Setting the rivet on the O-ring strap
Feche a extremidade da tira do anel de vedação (F) with a rivet, using your rivet setter to set it up.
Costurando tudo junto
All the elements of the swan will be stitched together using a saddle stitch.
Stitch the wings (A, B, C) to the both halves of the body (D1 e D2). Start with the largest wing (A), then overlap the next wing (B) and end with the smallest wing in the forefront (C).
Stitch the two opposite sides of the beak (E1 e E2) through both halves of the body (D1 e D2).
Stitch the two halves of the swan (D1 e D2) junto.
Adicione a alça (F) behind the wings.
Don’t forget to add some polyester stuffing as you stitch the body closed.
Toques finais
Add the O-ring carabiner to the strap to complete your bag charm!
This alternative version was stitched using a cross-stitch. It is a bit more tricky to stitch which is why I showcased the saddle-stitched version in the tutorial but I wanted to show you the result in case you wished to give cross-stitching a go. It gives a more 3D effect to the swan which is quite appealing.
Resultado final
Espero que você tenha gostado deste tutorial. Por favor, considere postar uma foto da sua criação nos comentários abaixo. Significaria muito para mim ver meus pequenos projetos sendo divulgados ao mundo enquanto você os torna seus.
Qualquer feedback/pergunta sobre este tutorial ou ideia de projeto que você gostaria de ver postado aqui é e sempre será mais que bem-vindo.
Feliz artesanato!
Notas de rodapé
O seguinte conteúdo online forneceu alguma ajuda e/ou inspiração durante a realização deste projeto: