Add a touch of magic to your everyday carry! In this tutorial, we’ll be stitching up a delightful unicorn bag charm that’s as fun to make as it is to show off. The real enchantment comes to life as we layer a rainbow of leather pieces to create its flowing, colorful mane. Get ready to craft a little piece of fantasy that will brighten up your keys, bag, or interior!
Stampalo su carta US Letter o A4 a seconda della versione scaricata.
Assicurati che il motivo non venga ridimensionato controllando le impostazioni di stampa. Puoi verificare se è stato stampato correttamente misurando il riferimento che trovi in fondo ad ogni pagina.
Conserva lo schema di montaggio per aiutarti a posizionare i pezzi più avanti durante il processo di cucitura.
Fissare i pezzi del disegno sulla pelle
Ritaglia grossolanamente i diversi elementi del disegno e fissali al tuo pezzo di pelle con del nastro adesivo.
Fare i buchi
Use stitching prongs or a 1mm hole punch to punch the stitching holes directly on top of the paper.
Utilizzare un perforatore da 3 mm per praticare i fori che ospiteranno il rivetto sulla cinghia O-ring (elemento annotato S on the pattern) and a 5mm hole punch for the eyes on both sides of the body (C).
Ritagliare i pezzi del progetto
Utilizzando un paio di forbici o un coltello X-Acto, ritaglia tutti i pezzi del progetto.
You’ll notice that elements T are ridiculously small and may prove difficult to cut-out. Those are optional. Please refer to the last step (ie: Finiture) to decide if you’d like to use them or not.
Painting/dyeing the leather
This is a fun project to paint as it showcases all the colors of the rainbow to create the fabulous mane! I used Angelus leather paints and metallic gold paint for the O-ring tab.
Create a loop at the end of the O-ring strap (S) with a rivet, using your rivet setter to set it up.
Gluing the eyes
Set the plastic eyes in place in their sockets.
Apply a generous amount of glue to the backside in order to secure them in place and wait for it to dry completely.
Stitching the horn
To stitch together both halves of the horn (F), first join two opposite edges with a cross-stitch starting at the second hole from the base.
Do the same with the other two opposite edges (stopping at the second hole from the base) to complete the horn. You can loop the thread to fill-in the space between each pair of holes to create the appearance of rings on the horn.
Finally add some stuffing to the horn to shape the cone.
Cucendo tutto insieme
Stitch the cheeks (UN) and the hearts (B) to both halves of the body (C1 E C2).
Next stitch the hooves and the two halves of the body together (E1 E D1 Sopra C1, E2 E D2 Sopra C2).
You can also stitch them during the next step which would be easier to do. I wanted to use a different thread color for the hooves compared to the body’s which is why I sewed them separately.
Stitching the mane involves a lot of overlapping pieces thus I’ll give you the detail of what’s going on for each hole. In each case, I will list all the layers that the needle will go through in the overlapping order, assuming that it first enters through the back of the body (C2).
If you look at the assembly diagram, you’ll see that we start stitching one hole before the first element of the mane. Let’s number this starting hole hole 0.
hole 1: starting at the back, our needle goes through C2 -> G -> C1
hole 7: C2 -> K2 (ear) -> J -> l -> K1 (ear) -> M -> C1
hole 8: C2 -> l -> C1
hole 9: C2 -> l -> N -> C1
hole 10: C2 -> F (horn) -> l -> F (horn) -> C1
hole 11: C2 -> F (horn) -> F (horn) -> C1
Add the snout (O1 E O2) over each side of the face.
At that point you can start adding stuffing inside the body.
Stitch the 3 pieces of the tail (P Sopra Q Sopra R) in between the two halves of the body.
Stitch the O-ring’s strap (S) in between the two halves of the body and finish stitching the unicorn.
Finiture
The small pieces T1 and T2 represent the cavity of the ears. You could simply paint that detail over the white background of each ear K1 and K2. I tried it out and thought that it looked rather flat compared to the other details of the unicorn which is why I decided to glue another piece instead. However if you don’t want to deal with such tiny pieces know that painting those details instead is completely fine.
Using leathercraft glue or superglue, glue the two ear’s (K1 E K2) pink details (T1 E T2) al suo posto.
Finally add the O-ring carabiner to the strap to complete your bag charm.
Risultato finale
Spero che questo tutorial vi sia piaciuto. Vi prego di pubblicare una foto della vostra creazione nei commenti qui sotto. Per me significherebbe molto vedere i miei piccoli progetti realizzati da voi, che li fate vostri.
Qualsiasi feedback/domanda su questo tutorial o idea di progetto che vorresti vedere pubblicato qui è e sarà sempre più che benvenuto.
Buona lavorazione!
Note a piè di pagina
I seguenti contenuti online hanno fornito assistenza e/o ispirazione durante la realizzazione di questo progetto:
Quando si effettua il login per la prima volta utilizzando un pulsante Login Social, raccogliamo le informazioni del profilo pubblico del tuo account condivise dal fornitore di Login Social, in base alle impostazioni di privacy dell'utente. Otteniamo anche il tuo indirizzo e-mail per creare automaticamente un account per te nel nostro sito web. Una volta creato l'account, sarai connesso a questo account.
Non accettoAccetto
Autorizzo a creare un account
Quando si effettua il login per la prima volta utilizzando un pulsante Login Social, raccogliamo le informazioni del profilo pubblico del tuo account condivise dal fornitore di Login Social, in base alle impostazioni di privacy dell'utente. Otteniamo anche il tuo indirizzo e-mail per creare automaticamente un account per te nel nostro sito web. Una volta creato l'account, sarai connesso a questo account.
Esercitazione
Unicorn Bag Charm
3 ore
Facile
Comune per la lavorazione della pelle
Add a touch of magic to your everyday carry! In this tutorial, we’ll be stitching up a delightful unicorn bag charm that’s as fun to make as it is to show off. The real enchantment comes to life as we layer a rainbow of leather pieces to create its flowing, colorful mane. Get ready to craft a little piece of fantasy that will brighten up your keys, bag, or interior!
Requisiti
Competenze
Utensili
Distinta materiali
Modello
Modello di ciondolo per borsa Unicorno
2,00 €Procedura dettagliata
Stampa del modello
Puoi prendi il modello qui se non l'hai già fatto.
Stampalo su carta US Letter o A4 a seconda della versione scaricata.
Assicurati che il motivo non venga ridimensionato controllando le impostazioni di stampa. Puoi verificare se è stato stampato correttamente misurando il riferimento che trovi in fondo ad ogni pagina.
Conserva lo schema di montaggio per aiutarti a posizionare i pezzi più avanti durante il processo di cucitura.
Fissare i pezzi del disegno sulla pelle
Ritaglia grossolanamente i diversi elementi del disegno e fissali al tuo pezzo di pelle con del nastro adesivo.
Fare i buchi
Use stitching prongs or a 1mm hole punch to punch the stitching holes directly on top of the paper.
Utilizzare un perforatore da 3 mm per praticare i fori che ospiteranno il rivetto sulla cinghia O-ring (elemento annotato S on the pattern) and a 5mm hole punch for the eyes on both sides of the body (C).
Ritagliare i pezzi del progetto
Utilizzando un paio di forbici o un coltello X-Acto, ritaglia tutti i pezzi del progetto.
You’ll notice that elements T are ridiculously small and may prove difficult to cut-out. Those are optional. Please refer to the last step (ie: Finiture) to decide if you’d like to use them or not.
Painting/dyeing the leather
This is a fun project to paint as it showcases all the colors of the rainbow to create the fabulous mane! I used Angelus leather paints and metallic gold paint for the O-ring tab.
Setting the rivet on the O-ring strap
Create a loop at the end of the O-ring strap (S) with a rivet, using your rivet setter to set it up.
Gluing the eyes
Set the plastic eyes in place in their sockets.
Apply a generous amount of glue to the backside in order to secure them in place and wait for it to dry completely.
Stitching the horn
To stitch together both halves of the horn (F), first join two opposite edges with a cross-stitch starting at the second hole from the base.
Do the same with the other two opposite edges (stopping at the second hole from the base) to complete the horn. You can loop the thread to fill-in the space between each pair of holes to create the appearance of rings on the horn.
Finally add some stuffing to the horn to shape the cone.
Cucendo tutto insieme
Stitch the cheeks (UN) and the hearts (B) to both halves of the body (C1 E C2).
Next stitch the hooves and the two halves of the body together (E1 E D1 Sopra C1, E2 E D2 Sopra C2).
You can also stitch them during the next step which would be easier to do. I wanted to use a different thread color for the hooves compared to the body’s which is why I sewed them separately.
Stitching the mane involves a lot of overlapping pieces thus I’ll give you the detail of what’s going on for each hole. In each case, I will list all the layers that the needle will go through in the overlapping order, assuming that it first enters through the back of the body (C2).
If you look at the assembly diagram, you’ll see that we start stitching one hole before the first element of the mane. Let’s number this starting hole hole 0.
Add the snout (O1 E O2) over each side of the face.
At that point you can start adding stuffing inside the body.
Stitch the 3 pieces of the tail (P Sopra Q Sopra R) in between the two halves of the body.
Stitch the O-ring’s strap (S) in between the two halves of the body and finish stitching the unicorn.
Finiture
The small pieces T1 and T2 represent the cavity of the ears. You could simply paint that detail over the white background of each ear K1 and K2. I tried it out and thought that it looked rather flat compared to the other details of the unicorn which is why I decided to glue another piece instead. However if you don’t want to deal with such tiny pieces know that painting those details instead is completely fine.
Using leathercraft glue or superglue, glue the two ear’s (K1 E K2) pink details (T1 E T2) al suo posto.
Finally add the O-ring carabiner to the strap to complete your bag charm.
Risultato finale
Spero che questo tutorial vi sia piaciuto. Vi prego di pubblicare una foto della vostra creazione nei commenti qui sotto. Per me significherebbe molto vedere i miei piccoli progetti realizzati da voi, che li fate vostri.
Qualsiasi feedback/domanda su questo tutorial o idea di progetto che vorresti vedere pubblicato qui è e sarà sempre più che benvenuto.
Buona lavorazione!
Note a piè di pagina
I seguenti contenuti online hanno fornito assistenza e/o ispirazione durante la realizzazione di questo progetto: