I’ve been wanting to add more bird to my ever growing menagerie of animals bag charms for a while. Evoking grace and elegance with their luscious plumage, this couple of black and white swan seemed like the perfect addition to my collection. No doubt that it will shine adding a touch of aquatic wilderness to your favourite handbag!
Stampalo su carta US Letter o A4 a seconda della versione scaricata.
Assicurati che il motivo non venga ridimensionato controllando le impostazioni di stampa. Puoi verificare se è stato stampato correttamente misurando il riferimento che trovi in fondo ad ogni pagina.
Conserva lo schema di montaggio per aiutarti a posizionare i pezzi più avanti durante il processo di cucitura.
Fissare i pezzi del disegno sulla pelle
Ritaglia grossolanamente i diversi elementi del disegno e fissali al tuo pezzo di pelle con del nastro adesivo.
Put aside the two masks. Those pieces will be used during to paint the motifs of the swan’s head.
Fare i buchi
Utilizzare le punte di cucitura o una perforatrice per praticare i fori di cucitura direttamente sulla parte superiore della carta.
Utilizzare un perforatore da 3 mm per praticare i fori che ospiteranno il rivetto sulla cinghia O-ring (elemento annotato F sul modello).
Ritagliare i pezzi del progetto
Utilizzando un paio di forbici o un coltello X-Acto, ritaglia tutti i pezzi del progetto.
You can use a 3mm hole punch to handle the curves between the back and the base of the neck. A 7.5mm hole punch can be used for the curve between the face and the neck.
Painting / dyeing the leather
I painted this projects using Angelus leather paints. The beak is painted orange, the body white. To paint the wings, I created a gradient using a little bit of black paint mixed with the white.
If your hand is steadier than mine, you probably won’t need to use this trick.
Use the mask to paint the face’s black motif. First put a piece of masking tape on your cutting board. Lay-on the two mirrored masks and cover with a second piece of masking tape to secure them in place. Use an X-acto knife to cut around the mask’s template.
Apply the masks cut-out from the first layer of masking tape on both halves of the swan’s head. Then paint over it using black paint. Remove the masks.
When the black layer dried out, add two white spots over it for the eyes.
Setting the rivet on the O-ring strap
Chiudere l'estremità del cinturino O-ring (F) with a rivet, using your rivet setter to set it up.
Cucendo tutto insieme
All the elements of the swan will be stitched together using a saddle stitch.
Stitch the wings (UN, B, C) to the both halves of the body (D1 E D2). Start with the largest wing (UN), then overlap the next wing (B) and end with the smallest wing in the forefront (C).
Stitch the two opposite sides of the beak (E1 E E2) through both halves of the body (D1 E D2).
Stitch the two halves of the swan (D1 E D2) insieme.
Aggiungere la cinghia (F) behind the wings.
Don’t forget to add some polyester stuffing as you stitch the body closed.
Finiture
Add the O-ring carabiner to the strap to complete your bag charm!
This alternative version was stitched using a cross-stitch. It is a bit more tricky to stitch which is why I showcased the saddle-stitched version in the tutorial but I wanted to show you the result in case you wished to give cross-stitching a go. It gives a more 3D effect to the swan which is quite appealing.
Risultato finale
Spero che questo tutorial vi sia piaciuto. Vi prego di pubblicare una foto della vostra creazione nei commenti qui sotto. Per me significherebbe molto vedere i miei piccoli progetti realizzati da voi, che li fate vostri.
Qualsiasi feedback/domanda su questo tutorial o idea di progetto che vorresti vedere pubblicato qui è e sarà sempre più che benvenuto.
Buona lavorazione!
Note a piè di pagina
I seguenti contenuti online hanno fornito assistenza e/o ispirazione durante la realizzazione di questo progetto:
Quando accedi per la prima volta utilizzando un pulsante di accesso social, raccogliamo le informazioni del profilo pubblico del tuo account condivise dal provider di accesso social, in base alle tue impostazioni sulla privacy. Otteniamo anche il tuo indirizzo email per creare automaticamente un account per te nel nostro sito web. Una volta creato il tuo account, accederai a questo account.
DisaccordoEssere d'accordo
Permetto di creare un account
Quando accedi per la prima volta utilizzando un pulsante di accesso social, raccogliamo le informazioni del profilo pubblico del tuo account condivise dal provider di accesso social, in base alle tue impostazioni sulla privacy. Otteniamo anche il tuo indirizzo email per creare automaticamente un account per te nel nostro sito web. Una volta creato il tuo account, accederai a questo account.
Esercitazione
Swan Bag Charm
3 ore
Facile
Comune per la lavorazione della pelle
I’ve been wanting to add more bird to my ever growing menagerie of animals bag charms for a while. Evoking grace and elegance with their luscious plumage, this couple of black and white swan seemed like the perfect addition to my collection. No doubt that it will shine adding a touch of aquatic wilderness to your favourite handbag!
Requisiti
Competenze
Utensili
Distinta materiali
Modello
Swan Bag Charm Pattern
2,00 $Procedura dettagliata
Stampa del modello
Puoi prendi il modello qui se non l'hai già fatto.
Stampalo su carta US Letter o A4 a seconda della versione scaricata.
Assicurati che il motivo non venga ridimensionato controllando le impostazioni di stampa. Puoi verificare se è stato stampato correttamente misurando il riferimento che trovi in fondo ad ogni pagina.
Conserva lo schema di montaggio per aiutarti a posizionare i pezzi più avanti durante il processo di cucitura.
Fissare i pezzi del disegno sulla pelle
Ritaglia grossolanamente i diversi elementi del disegno e fissali al tuo pezzo di pelle con del nastro adesivo.
Put aside the two masks. Those pieces will be used during to paint the motifs of the swan’s head.
Fare i buchi
Utilizzare le punte di cucitura o una perforatrice per praticare i fori di cucitura direttamente sulla parte superiore della carta.
Utilizzare un perforatore da 3 mm per praticare i fori che ospiteranno il rivetto sulla cinghia O-ring (elemento annotato F sul modello).
Ritagliare i pezzi del progetto
Utilizzando un paio di forbici o un coltello X-Acto, ritaglia tutti i pezzi del progetto.
You can use a 3mm hole punch to handle the curves between the back and the base of the neck. A 7.5mm hole punch can be used for the curve between the face and the neck.
Painting / dyeing the leather
I painted this projects using Angelus leather paints. The beak is painted orange, the body white. To paint the wings, I created a gradient using a little bit of black paint mixed with the white.
If your hand is steadier than mine, you probably won’t need to use this trick.
Use the mask to paint the face’s black motif. First put a piece of masking tape on your cutting board. Lay-on the two mirrored masks and cover with a second piece of masking tape to secure them in place. Use an X-acto knife to cut around the mask’s template.
Apply the masks cut-out from the first layer of masking tape on both halves of the swan’s head. Then paint over it using black paint. Remove the masks.
When the black layer dried out, add two white spots over it for the eyes.
Setting the rivet on the O-ring strap
Chiudere l'estremità del cinturino O-ring (F) with a rivet, using your rivet setter to set it up.
Cucendo tutto insieme
All the elements of the swan will be stitched together using a saddle stitch.
Stitch the wings (UN, B, C) to the both halves of the body (D1 E D2). Start with the largest wing (UN), then overlap the next wing (B) and end with the smallest wing in the forefront (C).
Stitch the two opposite sides of the beak (E1 E E2) through both halves of the body (D1 E D2).
Stitch the two halves of the swan (D1 E D2) insieme.
Aggiungere la cinghia (F) behind the wings.
Don’t forget to add some polyester stuffing as you stitch the body closed.
Finiture
Add the O-ring carabiner to the strap to complete your bag charm!
This alternative version was stitched using a cross-stitch. It is a bit more tricky to stitch which is why I showcased the saddle-stitched version in the tutorial but I wanted to show you the result in case you wished to give cross-stitching a go. It gives a more 3D effect to the swan which is quite appealing.
Risultato finale
Spero che questo tutorial vi sia piaciuto. Vi prego di pubblicare una foto della vostra creazione nei commenti qui sotto. Per me significherebbe molto vedere i miei piccoli progetti realizzati da voi, che li fate vostri.
Qualsiasi feedback/domanda su questo tutorial o idea di progetto che vorresti vedere pubblicato qui è e sarà sempre più che benvenuto.
Buona lavorazione!
Note a piè di pagina
I seguenti contenuti online hanno fornito assistenza e/o ispirazione durante la realizzazione di questo progetto: