A few years ago, I crafted a marine-themed baby mobile for some friends, and one of my favorite elements was the killer whale. I loved the design so much, I knew it had to become a bag charm! In this tutorial, I’ll show you how to create your own sleek and playful orca charm to add to your collection.
Stampalo su carta US Letter o A4 a seconda della versione scaricata.
Assicurati che il motivo non venga ridimensionato controllando le impostazioni di stampa. Puoi verificare se è stato stampato correttamente misurando il riferimento che trovi in fondo ad ogni pagina.
Conserva lo schema di montaggio per aiutarti a posizionare i pezzi più avanti durante il processo di cucitura.
Fissare i pezzi del disegno sulla pelle
Ritaglia grossolanamente i diversi elementi del disegno e fissali al tuo pezzo di pelle con del nastro adesivo.
Fare i buchi
Utilizzare le punte di cucitura o una perforatrice per praticare i fori di cucitura direttamente sulla parte superiore della carta.
Utilizzare un perforatore da 3 mm per praticare i fori che ospiteranno il rivetto sulla cinghia O-ring (elemento annotato F on the pattern) and a 4mm hole punch for the eyes on elements B.
Ritagliare i pezzi del progetto
Utilizzando un paio di forbici o un coltello X-Acto, ritaglia tutti i pezzi del progetto.
Painting / dyeing the leather
The colors I used for this project couldn’t be simpler: black and white Angelus paints!
Setting the rivet on the O-ring strap
Create a loop at the end of the O-ring strap (E) with a rivet, using your rivet setter to set it up.
Gluing the eyes
Set the plastic eyes in place in their sockets.
Apply a generous amount of glue to the backside in order to secure them in place and wait for it to dry completely.
Cucendo tutto insieme
Start stitching the white motif next to the eye (UN SU B) utilizzando una cucitura a sella.
Next stitch the top part of the body to the belly (B Sopra C) using a black thread and a saddle stitch.
Don’t forget to add the fin (D) in between.
To join both halves of the orca, start by joining the belly (C1 E C2) using a white thread and a cross-stitch.
You can use a saddle stitch if you wish (it’s a bit easier) but the cross-stitch makes the orca look more 3 dimensional.
Switch to a black thread to continue stitching both halves of the orca.
Once you reach the hole at the tip of the body, add the tail (F).
This is the procedure I followed:
1 cross stitch between the left and right holes, ending in the same two opposite holes instead of progressing to the next two holes.
left thread goes through hole in the tail, crosses to enter right hole and comes back through left hole.
right thread goes through hole in the tail, crosses to enter left hole and comes back through the right hole.
1 cross stitch between the left and right holes now above the tail, progressing to the next two holes.
Add some stuffing as you progressively close the orca’s body.
Add the O-ring strap (E) between the two halves of the body (B1 E B2).
That’s it! Congratulations on making a beautiful orca bag charm!
Finiture
Complete your bag charm by adding the O-ring carabiner to the strap (E).
Risultato finale
Spero che questo tutorial vi sia piaciuto. Vi prego di pubblicare una foto della vostra creazione nei commenti qui sotto. Per me significherebbe molto vedere i miei piccoli progetti realizzati da voi, che li fate vostri.
Qualsiasi feedback/domanda su questo tutorial o idea di progetto che vorresti vedere pubblicato qui è e sarà sempre più che benvenuto.
Buona lavorazione!
Note a piè di pagina
I seguenti contenuti online hanno fornito assistenza e/o ispirazione durante la realizzazione di questo progetto:
Quando accedi per la prima volta utilizzando un pulsante di accesso social, raccogliamo le informazioni del profilo pubblico del tuo account condivise dal provider di accesso social, in base alle tue impostazioni sulla privacy. Otteniamo anche il tuo indirizzo email per creare automaticamente un account per te nel nostro sito web. Una volta creato il tuo account, accederai a questo account.
DisaccordoEssere d'accordo
Permetto di creare un account
Quando accedi per la prima volta utilizzando un pulsante di accesso social, raccogliamo le informazioni del profilo pubblico del tuo account condivise dal provider di accesso social, in base alle tue impostazioni sulla privacy. Otteniamo anche il tuo indirizzo email per creare automaticamente un account per te nel nostro sito web. Una volta creato il tuo account, accederai a questo account.
Esercitazione
Orca Bag Charm
3 ore
Facile
Comune per la lavorazione della pelle
A few years ago, I crafted a marine-themed baby mobile for some friends, and one of my favorite elements was the killer whale. I loved the design so much, I knew it had to become a bag charm! In this tutorial, I’ll show you how to create your own sleek and playful orca charm to add to your collection.
Requisiti
Competenze
Utensili
Distinta materiali
Modello
Orca Bag Charm Pattern
2,00 $Procedura dettagliata
Stampa del modello
Puoi prendi il modello qui se non l'hai già fatto.
Stampalo su carta US Letter o A4 a seconda della versione scaricata.
Assicurati che il motivo non venga ridimensionato controllando le impostazioni di stampa. Puoi verificare se è stato stampato correttamente misurando il riferimento che trovi in fondo ad ogni pagina.
Conserva lo schema di montaggio per aiutarti a posizionare i pezzi più avanti durante il processo di cucitura.
Fissare i pezzi del disegno sulla pelle
Ritaglia grossolanamente i diversi elementi del disegno e fissali al tuo pezzo di pelle con del nastro adesivo.
Fare i buchi
Utilizzare le punte di cucitura o una perforatrice per praticare i fori di cucitura direttamente sulla parte superiore della carta.
Utilizzare un perforatore da 3 mm per praticare i fori che ospiteranno il rivetto sulla cinghia O-ring (elemento annotato F on the pattern) and a 4mm hole punch for the eyes on elements B.
Ritagliare i pezzi del progetto
Utilizzando un paio di forbici o un coltello X-Acto, ritaglia tutti i pezzi del progetto.
Painting / dyeing the leather
The colors I used for this project couldn’t be simpler: black and white Angelus paints!
Setting the rivet on the O-ring strap
Create a loop at the end of the O-ring strap (E) with a rivet, using your rivet setter to set it up.
Gluing the eyes
Set the plastic eyes in place in their sockets.
Apply a generous amount of glue to the backside in order to secure them in place and wait for it to dry completely.
Cucendo tutto insieme
Start stitching the white motif next to the eye (UN SU B) utilizzando una cucitura a sella.
Next stitch the top part of the body to the belly (B Sopra C) using a black thread and a saddle stitch.
Don’t forget to add the fin (D) in between.
To join both halves of the orca, start by joining the belly (C1 E C2) using a white thread and a cross-stitch.
You can use a saddle stitch if you wish (it’s a bit easier) but the cross-stitch makes the orca look more 3 dimensional.
Switch to a black thread to continue stitching both halves of the orca.
Once you reach the hole at the tip of the body, add the tail (F).
This is the procedure I followed:
Add some stuffing as you progressively close the orca’s body.
Add the O-ring strap (E) between the two halves of the body (B1 E B2).
That’s it! Congratulations on making a beautiful orca bag charm!
Finiture
Complete your bag charm by adding the O-ring carabiner to the strap (E).
Risultato finale
Spero che questo tutorial vi sia piaciuto. Vi prego di pubblicare una foto della vostra creazione nei commenti qui sotto. Per me significherebbe molto vedere i miei piccoli progetti realizzati da voi, che li fate vostri.
Qualsiasi feedback/domanda su questo tutorial o idea di progetto che vorresti vedere pubblicato qui è e sarà sempre più che benvenuto.
Buona lavorazione!
Note a piè di pagina
I seguenti contenuti online hanno fornito assistenza e/o ispirazione durante la realizzazione di questo progetto: