A few years ago, I crafted a marine-themed baby mobile for some friends, and one of my favorite elements was the killer whale. I loved the design so much, I knew it had to become a bag charm! In this tutorial, I’ll show you how to create your own sleek and playful orca charm to add to your collection.
Imprímelo en papel tamaño carta o A4 según la versión que hayas descargado.
Asegúrese de que el patrón no cambie de tamaño comprobando la configuración de impresión. Puede verificar si se imprimió correctamente midiendo la referencia que se encuentra en la parte inferior de cada página.
Guarde el diagrama de ensamblaje para ayudarlo a colocar las piezas más adelante durante el proceso de costura.
Asegurar las piezas del patrón sobre el cuero.
Recorta aproximadamente los diferentes elementos del patrón y asegúralos a tu pieza de cuero con cinta adhesiva.
Perforando los agujeros
Utilice puntas de costura o una perforadora para perforar los agujeros de costura directamente sobre el papel.
Utilice una perforadora de 3 mm para perforar los orificios que acomodarán el remache en la correa de la junta tórica (elemento anotado F on the pattern) and a 4mm hole punch for the eyes on elements B.
Recortando las piezas del proyecto.
Con unas tijeras o un cuchillo X-Acto, recorta todas las piezas del proyecto.
Pintar / teñir el cuero
The colors I used for this project couldn’t be simpler: black and white Angelus paints!
Colocación del remache en la correa tórica
Create a loop at the end of the O-ring strap (mi) con un remache, utilizando su remachadora para colocarlo.
Gluing the eyes
Set the plastic eyes in place in their sockets.
Apply a generous amount of glue to the backside in order to secure them in place and wait for it to dry completely.
Cosiéndolo todo junto
Start stitching the white motif next to the eye (UN sobre B) usando una puntada de sillín.
Next stitch the top part of the body to the belly (B encima C) using a black thread and a saddle stitch.
Don’t forget to add the fin (D) in between.
To join both halves of the orca, start by joining the belly (C1 y C2) using a white thread and a cross-stitch.
You can use a saddle stitch if you wish (it’s a bit easier) but the cross-stitch makes the orca look more 3 dimensional.
Switch to a black thread to continue stitching both halves of the orca.
Once you reach the hole at the tip of the body, add the tail (F).
This is the procedure I followed:
1 cross stitch between the left and right holes, ending in the same two opposite holes instead of progressing to the next two holes.
left thread goes through hole in the tail, crosses to enter right hole and comes back through left hole.
right thread goes through hole in the tail, crosses to enter left hole and comes back through the right hole.
1 cross stitch between the left and right holes now above the tail, progressing to the next two holes.
Add some stuffing as you progressively close the orca’s body.
Add the O-ring strap (mi) between the two halves of the body (B1 y B2).
That’s it! Congratulations on making a beautiful orca bag charm!
Últimos retoques
Complete your bag charm by adding the O-ring carabiner to the strap (mi).
Resultado final
Espero que hayas disfrutado de este tutorial. Por favor, considera publicar una foto de tu creación en los comentarios. Significaría mucho para mí ver mis pequeños proyectos al mundo, a medida que los haces tuyos.
Cualquier comentario/pregunta sobre este tutorial o idea de proyecto que le gustaría ver publicado aquí es y siempre será más que bienvenido.
¡Feliz elaboración!
notas al pie
El siguiente contenido en línea proporcionó alguna ayuda y/o inspiración durante la realización de este proyecto:
Cuando inicia sesión por primera vez con un botón de inicio de sesión social, recopilamos la información de perfil público de su cuenta compartida por el proveedor de inicio de sesión social, en función de su configuración de privacidad. También obtenemos su dirección de correo electrónico para crear automáticamente una cuenta para usted en nuestro sitio web. Una vez creada su cuenta,'habrá iniciado sesión en esta cuenta.
DiscreparAceptar
Permito crear una cuenta
Cuando inicia sesión por primera vez con un botón de inicio de sesión social, recopilamos la información de perfil público de su cuenta compartida por el proveedor de inicio de sesión social, en función de su configuración de privacidad. También obtenemos su dirección de correo electrónico para crear automáticamente una cuenta para usted en nuestro sitio web. Una vez creada su cuenta,'habrá iniciado sesión en esta cuenta.
Tutorial
Encanto para bolso Orca
3 horas
Fácil
Común para marroquinería
A few years ago, I crafted a marine-themed baby mobile for some friends, and one of my favorite elements was the killer whale. I loved the design so much, I knew it had to become a bag charm! In this tutorial, I’ll show you how to create your own sleek and playful orca charm to add to your collection.
Requisitos
Habilidades
Instrumentos
Lista de materiales
Patrón
Orca Bag Charm Pattern
2,00 €Recorrido
Imprimiendo el patrón
Puede obtener el patrón aquí si aún no lo has hecho.
Imprímelo en papel tamaño carta o A4 según la versión que hayas descargado.
Asegúrese de que el patrón no cambie de tamaño comprobando la configuración de impresión. Puede verificar si se imprimió correctamente midiendo la referencia que se encuentra en la parte inferior de cada página.
Guarde el diagrama de ensamblaje para ayudarlo a colocar las piezas más adelante durante el proceso de costura.
Asegurar las piezas del patrón sobre el cuero.
Recorta aproximadamente los diferentes elementos del patrón y asegúralos a tu pieza de cuero con cinta adhesiva.
Perforando los agujeros
Utilice puntas de costura o una perforadora para perforar los agujeros de costura directamente sobre el papel.
Utilice una perforadora de 3 mm para perforar los orificios que acomodarán el remache en la correa de la junta tórica (elemento anotado F on the pattern) and a 4mm hole punch for the eyes on elements B.
Recortando las piezas del proyecto.
Con unas tijeras o un cuchillo X-Acto, recorta todas las piezas del proyecto.
Pintar / teñir el cuero
The colors I used for this project couldn’t be simpler: black and white Angelus paints!
Colocación del remache en la correa tórica
Create a loop at the end of the O-ring strap (mi) con un remache, utilizando su remachadora para colocarlo.
Gluing the eyes
Set the plastic eyes in place in their sockets.
Apply a generous amount of glue to the backside in order to secure them in place and wait for it to dry completely.
Cosiéndolo todo junto
Start stitching the white motif next to the eye (UN sobre B) usando una puntada de sillín.
Next stitch the top part of the body to the belly (B encima C) using a black thread and a saddle stitch.
Don’t forget to add the fin (D) in between.
To join both halves of the orca, start by joining the belly (C1 y C2) using a white thread and a cross-stitch.
You can use a saddle stitch if you wish (it’s a bit easier) but the cross-stitch makes the orca look more 3 dimensional.
Switch to a black thread to continue stitching both halves of the orca.
Once you reach the hole at the tip of the body, add the tail (F).
This is the procedure I followed:
Add some stuffing as you progressively close the orca’s body.
Add the O-ring strap (mi) between the two halves of the body (B1 y B2).
That’s it! Congratulations on making a beautiful orca bag charm!
Últimos retoques
Complete your bag charm by adding the O-ring carabiner to the strap (mi).
Resultado final
Espero que hayas disfrutado de este tutorial. Por favor, considera publicar una foto de tu creación en los comentarios. Significaría mucho para mí ver mis pequeños proyectos al mundo, a medida que los haces tuyos.
Cualquier comentario/pregunta sobre este tutorial o idea de proyecto que le gustaría ver publicado aquí es y siempre será más que bienvenido.
¡Feliz elaboración!
notas al pie
El siguiente contenido en línea proporcionó alguna ayuda y/o inspiración durante la realización de este proyecto: